IEEE-KC Space Challenge
Submit Ideas for Space Balloon Launch 2017
IEEE-KC needs your help – our 2017 launch planning has commenced, and we are in need of imaginative and adventurous students to submit experiment ideas! As our high-altitude balloon makes it’s journey to the edge of space, there will be extreme temperatures, from the current ground temperature at the time of launch to high-altitude temperatures in the vicinity of -90 degrees C (-130 degrees Fahrenheit). Other extreme conditions will also exist, such as atmospheric pressures less than 1 psi, elevated levels of natural radiation from space, jet stream turbulence and wind speeds of up to 200 mph, and descent speeds of over 100 mph. These conditions will pose certain challenges, but more importantly, they provide exciting opportunities for experimentation and data collection, which is where our request begins. Submit experiment ideas at the link below by 12/31/16, and if selected not only will our 2017 team develop, test, and launch your experiment in our payload, but you’ll also be invited to attend the space launch and post-launch event!
|Click here to submit your experiment ideas now – entries must be submitted by 12/31/16!|
While the Space Balloon Challenge was established and is primarily funded by the Kansas City IEEE section, the two other founding partners are the Crance Family Foundation and Burns & McDonnell, both of which have provided resources that contributed to the initial establishment and continued success of the program. Volunteers from IEEE-KC worked closely with the student teams to make each year’s project a success. IEEE-KC is looking forward to the next launch and to reviewing as many experiment proposals as possible! Want to do more? Additional Volunteers are always welcome! For information contact Chris Crance (firstname.lastname@example.org) or Alan Washburn (email@example.com).
We are astronomically grateful to our 2015-2016 Space Challenge Sponsor – the Crance Family Foundation, and to the significant volunteer support from Burns & McDonnell! We would also like to thank Lee’s Summit HS Team Driven for the continued use of their shop space and equipment!